Stainless steel flagpole snap hook 3.5 inches, our most economical flagpole snap. The eyelet on this snap hook is designed to withstand the pressures of fling a flag and will not pull through. Works with halyard rope up to 5/16th in size. In applications for flags larger that 8 x 12 with rope 3/8 inches or larger our Large Stainless Steel Snap my be suitable.
1/8 INCH STAINLESS STEEL AIRCRAFT CABLE @ 1.20 per foot
Designed for internal cable with winch assembly flagpoles only.
1/8″ stainless steel aircraft cable with a tensile strength of 1,408 pounds.
Comes with a UV rating, made for flagpole use. Because of its elasticity, nylon can absorb shock that could damage other ropes, while also providing good resistance to abrasion and rot.
Comes with a UV rating, made speciffically for flagpole use. Because of its elasticity, nylon can absorb shock that could damage other ropes, while also providing good resistance to abrasion and rot.
Comes with a UV rating, made for flagpole use. Because of its elasticity, nylon can absorb shock that could damage other ropes, while also providing good resistance to abrasion and rot.
Quick Link – Stainless Steel
Connecting link 5/16″ stainless steel with threaded barrel lock.
length – 3 7/8″ , width 2 3/8″
The most common flagpole installation method, the foundation sleeve assembly is fabricated from 16GA. galvanized steel welded to a base plate with a square dimension at least 4″ greater than the outside diameter of the sleeve. A 3/4″ diameter grounding spike is welded to the base plate. Centering wedges are welded inside the assembly to aid in flagpole alignment. A setting plate is welded to the grounding spike to provide the installer with a method of resting the assembly on the bottom of the excavated hole and allowing the concrete to completely encase the unit. Generally accepted industry practice calls for 1′ of the flagpole to be encased in the ground sleeve assembly for each 10′ of exposed flagpole height and, for ease in vertical alignment of the shaft, the inside diameter of the sleeve should be at least 2″ greater than the flagpole diameter with the area between the flagpole and the sleeve filled with dry sand. If your requirements are not listed below, consult the factory regarding custom sizes or applications.
Winch handle for stainless steel winch.
WINCH HANDLE ONLY, WINCH SOLD SEPARETLY.
